激光器售后拍摄步骤?
视频格式:
1.接线→显示清晰，电源,控制板，激光器，正确的接线顺序。（红线“正线”黑线“负极”，非本店铺匹配控制板，接线方法与客服确认）
2.通电→接通电源，电脑与控制板正确连接，点击“强光”“弱光”按钮测激光器是否出光正常。（测试前打开激光器后面电源开关）
3.定焦→激光器装机测试，确定激光头与被雕刻物体间距离，在激光器可调焦范围内。（仅限蓝色外壳，5.5w 可调焦距离3mm以内，15w定焦 2cm定焦柱的高度）
4.调焦→雕刻前，确定激光器光圈在调焦范围内是最小点，保证激光输出功率和精度。
5.雕刻→在机架正常工作的情况下，针对被雕刻物体的材质和样式，调节雕刻方式（线雕刻/点雕刻），激光强度，雕刻速度，点距线距大小，点雕刻的时间，以达到最好的雕刻效果。
Video format:
1. Wiring → display clear, power supply, control panel, laser, correct wiring sequence. (Red line "positive line" black line "negative", not the shop matching control board, wiring method and customer service confirmation)
2. Power on → power on, the computer and the control board are correctly connected, click the “glare” and “weak light” buttons to measure whether the laser is normal. (turn on the power switch behind the laser before testing)
3. Fixed focus → laser installation test to determine the distance between the laser head and the object being engraved, within the adjustable focus range of the laser. (Blue housing only, 5.5w adjustable focal length within 3mm, 15w fixed focus 2cm fixed focus column height)
4. Before focusing → engraving, make sure that the laser aperture is the smallest point in the focus range, ensuring laser output power and accuracy.
5. Engraving→In the case of normal working of the frame, adjust the engraving method (line engraving/point engraving), laser intensity, engraving speed, point distance and line spacing, and point engraving time for the material and style of the object to be engraved. To achieve the best engraving effect.
1.接线→显示清晰，电源,控制板，激光器，正确的接线顺序。（红线“正线”黑线“负极”，非本店铺匹配控制板，接线方法与客服确认）
2.通电→接通电源，电脑与控制板正确连接，点击“强光”“弱光”按钮测激光器是否出光正常。（测试前打开激光器后面电源开关）
3.定焦→激光器装机测试，确定激光头与被雕刻物体间距离，在激光器可调焦范围内。（仅限蓝色外壳，5.5w 可调焦距离3mm以内，15w定焦 2cm定焦柱的高度）
4.调焦→雕刻前，确定激光器光圈在调焦范围内是最小点，保证激光输出功率和精度。
5.雕刻→在机架正常工作的情况下，针对被雕刻物体的材质和样式，调节雕刻方式（线雕刻/点雕刻），激光强度，雕刻速度，点距线距大小，点雕刻的时间，以达到最好的雕刻效果。
Video format:
1. Wiring → display clear, power supply, control panel, laser, correct wiring sequence. (Red line "positive line" black line "negative", not the shop matching control board, wiring method and customer service confirmation)
2. Power on → power on, the computer and the control board are correctly connected, click the “glare” and “weak light” buttons to measure whether the laser is normal. (turn on the power switch behind the laser before testing)
3. Fixed focus → laser installation test to determine the distance between the laser head and the object being engraved, within the adjustable focus range of the laser. (Blue housing only, 5.5w adjustable focal length within 3mm, 15w fixed focus 2cm fixed focus column height)
4. Before focusing → engraving, make sure that the laser aperture is the smallest point in the focus range, ensuring laser output power and accuracy.
5. Engraving→In the case of normal working of the frame, adjust the engraving method (line engraving/point engraving), laser intensity, engraving speed, point distance and line spacing, and point engraving time for the material and style of the object to be engraved. To achieve the best engraving effect.